SEAGA Dollar Bill Changer Coin Vending Machine Fits 1,000 Coins ($250) or US Quarter Sized Tokens for Games or Slot Machines Best ChangeMaker


View on Amazon

Brand: Seaga


  • ✔ LARGE COIN HOPPER - This bill changer can hold up to 1,000 coins ($250). It takes $1 and $5 bills out of the box, but can be programmed for $10 and $20 bills.
  • ✔ RELIABLE ROTARY DELIVERY SYSTEM - Because it has the hopper all you need to do is poor the coins in, it's that EASY. The Coin Machine can also dispense TOKENS that are US Quarter sized.
  • ✔ TWO LOCK SECURITY - This CoinMaker has security in mind. You must use two keys and turn them in a precise method in order to open the machine. This ensure tight security and less risk of theft.
  • ✔ SOLID STEEL CONTRUCTION - We only provide quality products. Because Seaga's Coin Vending Machine is made of solid steel, it is BUILT TO LAST! Measurements are 21" High, 8.75" Wide and 10.5" Deep.
  • ✔ EASILY MOUNTS TO WALL OR VENDING MACHINE - The machine comes with a template that you can use to easily mount the machine on the wall or onto a vending machine.

Details: NOTICE Changer is shipped programmed to accept USD $1's and $5's. You can flip a switch to change it to $10's and $20's. To program the machine to accept $1's, $5's, $10's, and $20's at the same time you must use a re-programing sheet. Simply message the seller for the sheet after purchasing. INTRODUCTION This ChangeMaker has been designed to give you many years of dependable service. It requires little maintenance and is easy to set up and operate. It is also designed to operate simply and reliably MOUNTING The ChangeMaker has three (3) plugged holes in the left-hand side of the Case for optional mounting. A drill, a ¼" drill bit will be required along with sufficient hardware appropriate to your application and tools for this hardware. A mounting template for drilling holes is provided. TO MOUNT:   a. Secure the template to the mounting surface once you have made sure that nothing will obstruct the drilling of holes or the placement of bolts.   2. Drill holes. Discard Template.   3. Unlock and open the Front Door.   4. Pull Coin Hopper Assembly forward.   5. Remove the three (3) Plugs by pushing them out from inside the Body.   6. Attach the ChangeMaker to surface with hardware appropriate to your application.   6. Slide Coin Hopper Assembly back in and reconnect cable. INDOOR USE ONLY Not for outdoor use. Outdoor restriction includes areas inside that are excessively dirty, have temperatures over 90 degrees F and/or 80% humidity or temperatures under 40 degrees F. Installations determined to be classified as Outdoor voids manufacture warranty. WARRANTY Limited 1 year manufacturer warranty comes with each purchase. It warrants that the equipment is free from defects in material and factory workmanship. BUY YOUR SEAGA COIN CHANGER TODAY!

EAN: 0682428095136