f

Fluke Networks MT-8200-50A IntelliTone 100 Toner and Probe Kit

Fluke Networks

Brand: Fluke Networks

Features:

  • IntelliTone digital toning eliminates noise and false signals
  • SmartTone analog toning precisely isolates individual wire pairs
  • Locates cables safely and effectively on active networks
  • Verifies twisted-pair installation with visual end-to-end continuity test
  • Probe detects digital signal and 1 kHz signal from the analog toner

Hardware Platform: PC

Legal Disclaimer: Shipping is 3-5 days FedEx or UPS with tracking number. Brand New. Continental USA street address ONLY, we do not ship to P/O box, APO, AE, or international addresses

Operating System: DOS

Details:

The Fluke Networks IntelliTone Pro 100 tone generator and probe kit with patch cords, test leads, and F-type adapter verifies and troubleshoots virtually any copper cabling in datacom and telecom networks using IntelliTone digital signaling to locate and trace data cabling on active networks and analog signaling to isolate individual wire pairs and trace voice, audio, and video cabling on inactive networks. The tone generator identifies the type of service, tests for Line 1 POTS (plain old telephone service) polarity and ring, and verifies continuity. Its F-type connector supports VDV (voice, data, and video) cables including RJ45, RJ11, coaxial, and bare wire while its banana jacks accommodate test leads. It generates IntelliTone digital signals that minimize the effect of signal bleed for locating high-grade data cabling (Cat 5e/6/6a) on active networks, and generates 500 to 1,200 Hz analog signals with four distinct SmartTone cadences for isolating individual wire pairs and locating voice, audio, and video cabling (Cat 3 and below) on inactive networks. LED indicators identify a jack as datacom, telecom, or dead. The tone generator turns off automatically after 2.5 hours of inactivity. The probe detects the signals from the tone generator to locate and trace cables at cable racks, in patch panels, and even behind walls, and identifies detected signals audibly and with eight LEDs that light successively as the signal strength increases for prompt isolation of a single cable within a bundle. A sync LED shows battery strength at power-up and confirms reception of IntelliTone signals, and the cable map function allows the probe to validate the cable map on RJ11 and RJ45 connectors, testing continuity and finding short circuits, open circuits, and crossed-pair wiring faults on all four pairs of UTP and STP twisted pair cabling. RJ11 and RJ45 jacks plug into a port on the bottom of the probe. The probe turns off automatically after one hour of inactivity. The kit comes with an RJ11-to-RJ11 patch cord, an RJ45-to-RJ45 patch cord, a test lead set with banana jacks to alligator clips, a female-to-female F-type connector adapter, a 9V alkaline battery, a product manuals CD, and instructions. Additional specifications include various environmental operating conditions. Tone generators and probes are used by network technicians to troubleshoot and maintain wires and cable in telephone and data networks.

IntelliTone Pro 100 Toner and Probe Specifications
Digital tones generated and detected IntelliTone signals
Analog tones generated and detected 500 to 1,200Hz signals (includes SmartTone signals)
Cabling applications Copper cabling such as 75 or 50Ω coaxial cable including RG6, RG59, and others for CATV/CCTV; two-conductor control, security, and generic cable; Category 5e and Category 6 cable for 10 Base-T and 10/100 Base-T Ethernet networks; POTS telecom service and UTP (unshielded twisted pair) cable including Category 3 telephone cable; STP (shielded twisted pair) cable
Display Toner: (4) LED indicators (line 1, line 2, Ethernet connectivity, cable continuity)
Probe: (8) LED signal strength indicators, (1) LED sync indicator (confirms reception of IntelliTone signal)
Interface Toner: Main Mod8 port for tone generation on all 4 pairs of UTP/STP cabling; F-type connector for coaxial cabling; (2) banana jack plugs for two-conductor wiring
Probe: Main Mod8 port for cable map
Voltage protection (toner) 100V
Audio (probe) IntelliTone: microprocessor controlled audio files
Analog: detected tone generator signal
Agency certifications and standards met CE (European Conformity) marking; Australia N10140 C-Tick EMC standard
Power source (2) 9V alkaline batteries (included)
Dimensions Toner: 14.1 x 7.5 x 3.2cm/5.54 x 2.94 x 1.25 inches (H x W x D)
Probe: 22.2 x 4.8 x 3.2cm/8.73 x 1.88 x 1.26 inches (H x W x D)
Weight (with battery) Toner: 170g/6.0oz.
Probe: 133g/4.7oz.

*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Datacom and telecom installation and test devices, such as toners and test sets, check cabling and wiring to help ensure proper connections and operation. Tone generator and probe sets, also called toners, are used to locate, trace, and isolate cables in copper media networks. Telephone test sets, also called butt sets, are specialized telephones that connect to telephone lines to check for proper operation and to isolate trouble. Some test sets incorporate a TDR (time-domain reflectometer) and toner for determining cable length and locating faults. While certain devices may be used on live networks, others are only suitable for inactive networks. Field technicians and installers use these devices to set up, maintain, and troubleshoot datacom and telecom cabling within a building or in outside plant (OSP) applications.

Fluke Networks manufactures tools for network infrastructure installation, testing, certification, and troubleshooting, in copper, fiber, and wireless networks, with its tools widely used by contractors, enterprises, and communication service providers. The company, which operates globally, is based in Everett, WA.

What's in the Box?

  • Fluke Networks IntelliTone Pro 100 Toner
  • Fluke Networks IntelliTone Pro 100 Probe
  • RJ11-to-RJ11 patch cord
  • RJ45-to-RJ45 patch cord
  • Test lead set with banana jacks to alligator clips
  • F-type connector adapter, female to female
  • (2) 9V alkaline batteries, one each for toner and probe
  • Product manuals CD
  • Instructions

UPC: 013039229670

EAN: 0777786267162